Maket reads a floor plan and raises it into a 3D model you can orbit and walk through. The conversion runs entirely in your browser, takes seconds, and is free: it does not touch your credit wallet. This guide covers what to feed it, how layers turn into walls, doors, windows and rooms, what the build animation shows, how to correct the result and how to get the model out again. If you have a DXF from your CAD tool, you can be walking through it before you finish reading.

Inputs

Maket reads two kinds of file. Floor plans go through wall, door, window and room detection with the layer-role editor: DXF, ASCII or binary (lines, polylines, arcs, circles, text, blocks, splines and ellipses); SVG, where layers come from group names such as Inkscape or Illustrator layers and units from a width in mm, cm or in (otherwise guessed); GeoJSON, including IMDF indoor maps, where longitude and latitude are projected to metres and room boundaries become walls; and the Maket JSON plan. DXF is by far the most common; export it as R2010 or later. Ready-made 3D models open directly in the scene for orbit, first-person walk and GLB export, without wall detection: GLB or single-file GLTF (a .gltf with external .bin or texture files is not supported), OBJ without MTL, FBX, STL, DAE, 3MF, PLY, 3DS, USDZ and VRML. Models up to about 5.5 MB can be saved to a project; larger ones can be viewed but not saved. DWG, DWT and DWS files from AutoCAD or a derivative such as BricsCAD, ZWCAD, DraftSight or GstarCAD (versions 2000 to 2018 tested) are converted to DXF on the server, up to 5.5 MB. A vector PDF is read as a drawing: thick dark lines and dark fills become walls, white gaps become openings and door swing arcs become doors; the scale is read from text such as "1:100", and if none is found 1:100 is assumed and you are warned. A photo or scan (PNG, JPG, WebP, or a scanned PDF page) is turned into walls, doors, windows and rooms by AI: it uses credits (about 1 to 3 for a simple plan), asks you to confirm first, takes 30 to 60 seconds and refunds the credits if no plan is recognised. The result is a drawing, so check the dimensions. IFC files exported from Revit or ArchiCAD open as a 3D model with counts of walls, doors, windows, spaces and slabs. Only SketchUp (SKP) and Revit (RVT) are not supported: export IFC or DXF/DWG from Revit, and DAE, OBJ or IFC from SketchUp. The original CAD file still gives the cleanest result.

Units are read from the DXF header. If the header does not declare them, Maket guesses from the size of the drawing and tells you what it guessed. Check that message: a plan converted at the wrong scale produces walls three metres thick or three millimetres thick, and both look like conversion bugs when they are really a units problem.

Projects and plans

Plans live inside projects. A project is a folder for a building; each floor plan is a plan inside it with a floor index, so a house is one project with a ground floor and a first floor, in order. Open Maket, type a project name and press Create project; nothing is uploaded yet. Inside the project, press Add plan or drop the file onto the scene. The plan is saved immediately under the file's name, the model is built and the animation plays. Uploading without a project is blocked with a hint, because plans belong somewhere.

Layers become roles

A DXF has no "wall" entity, only lines that someone drew where walls are, grouped into layers. Maket therefore assigns each layer a role: wall, door, window, room, text, decor or ignore. Common layer names are recognised automatically, including A-WALL, WALL and DUVAR for walls, A-DOOR and KAPI for doors, A-GLAZ, WINDOW and PENCERE for windows, and A-AREA, ROOM and MAHAL for rooms. Text and dimension layers are ignored as geometry. When names are unusual, Maket falls back to the busiest line layer as walls and lets you fix the rest.

Open the Layers panel to change a role; the scene rebuilds instantly. This is much faster than fixing the drawing in CAD, and for a one-off plan it is the whole edit. For a practice that converts plans regularly, rename layers once at the source and every plan converts cleanly from then on.

Walls, openings, rooms

  • Walls. Parallel double lines are merged into thick walls; single lines on a wall layer become thin partitions.
  • Doors. Arcs become doors and are attached to the nearest wall, which is cut to make the opening.
  • Windows. Window-layer geometry is attached to the nearest wall and cut in as an opening.
  • Rooms. Closed polygons become rooms with names and areas; the text inside a room becomes its label.

Wall height is not in a drawing, so Maket exposes it as a floor height slider. Furniture belongs on its own layer so it can be given the decor role rather than being read as walls.

The build animation

Five phases play when a plan loads: drawing, scan, rise, dress, walk. Press Skip to jump straight to the finished model or Replay to watch it again. The thumbnail captured when the animation finishes becomes the plan's thumbnail and the project's cover. In a client meeting, playing the animation once explains the plan better than a spoken description, and then handing over the keyboard in Walk mode shows you where the client hesitates: which doorway feels narrow, which room feels dark.

Walk, orbit and export

Orbit is the overview camera. Switch to Walk for a first-person tour with the keyboard. Export the model as GLB for any 3D tool, or press Save to store the plan with its layer settings and thumbnail so that it reopens exactly as you left it. Hover a project or plan name and use the pencil to rename it in place; Enter saves, Escape cancels. The trash icon deletes, and deletion is soft, so nothing is destroyed on the server and support can restore it.

Checklist for a clean conversion

  1. Units declared in the header, or drawn in millimetres and confirmed in the message Maket shows.
  2. One layer per role; dimensions and hatching kept off the wall layer.
  3. Wall corners closed and endpoints snapped, so rooms can be detected.
  4. One text entity per room, inside the room.
  5. Each floor as its own plan in one project, drawn with the same origin.

Frequently asked

Does Maket cost credits? Not for drawings: converting DXF, DWG, PDF, SVG, GeoJSON and IFC is free. Only photo or scan recognition uses credits; you confirm first, and the credits are refunded if no plan is recognised.

Why are some walls double thickness? Usually two overlapping wall pairs from a redrawn wall that was never deleted. Clean the drawing and reload.

Can I convert a PDF or a scanned plan? Yes. A vector PDF is read as a drawing, with the scale taken from text such as "1:100" (1:100 is assumed, with a warning, if none is found). A scan or photo is converted by AI for credits after you confirm, and the credits are refunded if no plan is recognised; check the dimensions afterwards. A DXF or DWG from the original CAD file still gives the cleanest result.

Can I automate it? Yes. The CLI has yesilcam maket analyze plan.dxf --json for checks, and maket create and maket save for projects and plans.